ENMET PO Box 979 Ann Arbor, MI 48106-0979 www.enmet.com Manual Part Number 80006-022 MCN-14-005, 09/02/14 RECON-I
RECON-IS ENMET 8 4.0 Troubleshooting RECON-IS Problem Possible reason Solution The detector cannot be turned on Battery used up Please contact E
RECON-IS ENMET 9 6.0 Maintenance In order for the RECON-IS to operate normally, please follow these maintenance procedures: Inspect, test and ca
RECON-IS ENMET 10 7.0 Technical Data and Specifications Detection Method Natural Diffusion Sensor Electrochemical Sensor Detection Range & A
RECON-IS ENMET 11 8.0 WARRANTY ENMET warrants new instruments to be free from defects in workmanship and material under normal use for a period o
PO Box 979 680 Fairfield Court Ann Arbor, Michigan 48106-0979 734.761.1270 Fax 734.761.3220 Returning an Instrument for Repair ENMET instrument
Repair Return Form Mailing Address: ENMET PO Box 979 Ann Arbor, Michigan 48106 Phone Number: 734.761.1270 FAX Number: 734.761.3220 Sh
Table of Contents 1.0 INTRODUCTION...
RECON-IS ENMET 1 1.0 Introduction The RECON-IS Series instruments are designed to detect toxic gases and oxygen concentrations in ambient air and
RECON-IS ENMET 2 2.0 RECON-IS Features Advanced 16-digit MCU for low consumption; 3V Lithium battery life approximate 2 year; High contr
RECON-IS ENMET 3 2.2 RECON-IS Display See Figure 2 for location of indications. Indication 1 Battery Status 2 Audio Alarm status 3 Vibration sta
RECON-IS ENMET 4 3.0 RECON-IS Operation 3.1 Turn On RECON-IS Press and hold the button for 3 seconds, the detector will turn on. After this, th
RECON-IS ENMET 5 3.3 Information Checking In the normal monitoring status, press and release the button twice to activate the backlite. Press the
RECON-IS ENMET 6 3.7 Alarm Information Alarm type Information displayed Low alarm: Slow Pulsed tone alarm sound Alarm LED Flashing Vib
RECON-IS ENMET 7 3.8 Calibration In order to assure the testing accuracy, ENMET suggests that the RECON-IS be calibrated at a minimum of every 18
Comentários a estes Manuais